Product Search

    SEARCH NOW FOR ALL YOUR HELICAL SOLUTIONS SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 51-100 of 500.
    HELICAL SOLUTIONS 03645

    HELICAL SOLUTIONS

    03645

    SQUARE END MILLS; MILL DIAMETER (DECIMAL INCH): 0.7500 ; MILL DIAMETER (INCH): 3/4 ; NUMBER OF FLUTES: 3 ; END MILL MATERIAL: SOLID CARBIDE ; LENGTH OF CUT (DECIMAL INCH): 1 ; LENGTH OF CUT ...
    £163.15 Price with VAT: £195.78 Buy Surplus As Low As £97.89 Price with VAT: £117.47
    £97.89 Price with VAT: £117.47
    HELICAL SOLUTIONS 03705

    HELICAL SOLUTIONS

    03705

    SQUARE END MILLS; MILL DIAMETER (DECIMAL INCH): 0.7500 ; MILL DIAMETER (INCH): 3/4 ; NUMBER OF FLUTES: 3 ; END MILL MATERIAL: SOLID CARBIDE ; LENGTH OF CUT (DECIMAL INCH): 4.0000 ; LENGTH OF ...
    £426.41 Price with VAT: £511.69 Buy Surplus As Low As £255.85 Price with VAT: £307.02
    £255.85 Price with VAT: £307.02
    HELICAL SOLUTIONS 04135

    HELICAL SOLUTIONS

    04135

    SQUARE END MILLS; MILL DIAMETER (DECIMAL INCH): 0.2500 ; MILL DIAMETER (INCH): 1/4 ; NUMBER OF FLUTES: 3 ; END MILL MATERIAL: SOLID CARBIDE ; LENGTH OF CUT (DECIMAL INCH): 0.375 ; LENGTH OF ...
    £58.59 Price with VAT: £70.30 Buy Surplus As Low As £35.60 Price with VAT: £42.72
    £35.60 Price with VAT: £42.72
    HELICAL SOLUTIONS 04137

    HELICAL SOLUTIONS

    04137

    SQUARE END MILLS; MILL DIAMETER (DECIMAL INCH): 0.2500 ; MILL DIAMETER (INCH): 1/4 ; NUMBER OF FLUTES: 3 ; END MILL MATERIAL: SOLID CARBIDE ; LENGTH OF CUT (DECIMAL INCH): 0.3750 ; LENGTH OF ...
    £79.35 Price with VAT: £95.22 Buy Surplus As Low As £48.20 Price with VAT: £57.84
    £48.20 Price with VAT: £57.84
    HELICAL SOLUTIONS 04167

    HELICAL SOLUTIONS

    04167

    SQUARE END MILLS; MILL DIAMETER (DECIMAL INCH): 0.3125 ; MILL DIAMETER (INCH): 5/16 ; NUMBER OF FLUTES: 3 ; END MILL MATERIAL: SOLID CARBIDE ; LENGTH OF CUT (DECIMAL INCH): 0.4375 ; LENGTH O ...
    £50.43 Price with VAT: £60.51 Buy Surplus As Low As £30.40 Price with VAT: £36.49
    £30.40 Price with VAT: £36.49
    HELICAL SOLUTIONS 04182

    HELICAL SOLUTIONS

    04182

    SQUARE END MILL: 5/16" DIA, 7/16" LOC, 3 FLUTES, SOLID CARBIDE 4" OAL, 5/16" SHANK DIA, 35 ° HELIX, SINGLE END, ZPLUS COATED, SERIES END MILLS FOR ALUMINUM - 3 FLUTE - SQUARE - 35 HELIX - RE ...
    £75.64 Price with VAT: £90.77 Buy Surplus As Low As £45.98 Price with VAT: £55.17
    £45.98 Price with VAT: £55.17
    HELICAL SOLUTIONS 04287

    HELICAL SOLUTIONS

    04287

    SQUARE END MILL: 1/2" DIA, 5/8" LOC, 3 FLUTE, SOLID CARBIDE
    £92.70 Price with VAT: £111.24 Buy Surplus As Low As £55.62 Price with VAT: £66.74
    £55.62 Price with VAT: £66.74
    HELICAL SOLUTIONS 04327

    HELICAL SOLUTIONS

    04327

    SQUARE END MILLS; MILL DIAMETER (DECIMAL INCH): 0.5000 ; MILL DIAMETER (INCH): 1/2 ; NUMBER OF FLUTES: 3 ; END MILL MATERIAL: SOLID CARBIDE ; LENGTH OF CUT (DECIMAL INCH): 0.6250 ; LENGTH OF ...
    £146.83 Price with VAT: £176.20 Buy Surplus As Low As £88.25 Price with VAT: £105.90
    £88.25 Price with VAT: £105.90
    HELICAL SOLUTIONS 05067

    HELICAL SOLUTIONS

    05067

    SQUARE END MILLS; MILL DIAMETER (DECIMAL INCH): 0.1875 ; MILL DIAMETER (INCH): 3/16 ; NUMBER OF FLUTES: 5 ; END MILL MATERIAL: SOLID CARBIDE ; LENGTH OF CUT (DECIMAL INCH): 0.3125 ; LENGTH O ...
    £31.89 Price with VAT: £38.27 Buy Surplus As Low As £19.28 Price with VAT: £23.14
    £19.28 Price with VAT: £23.14
    HELICAL SOLUTIONS 05097

    HELICAL SOLUTIONS

    05097

    SQUARE END MILL: 3/16" DIA, 3/4" LOC, 5 FLUTES, SOLID CARBIDE
    £43.01 Price with VAT: £51.61 Buy Surplus As Low As £25.96 Price with VAT: £31.15
    £25.96 Price with VAT: £31.15
    HELICAL SOLUTIONS 05127

    HELICAL SOLUTIONS

    05127

    SQUARE END MILLS; MILL DIAMETER (DECIMAL INCH): 0.2500 ; MILL DIAMETER (INCH): 1/4 ; NUMBER OF FLUTES: 5 ; END MILL MATERIAL: SOLID CARBIDE ; LENGTH OF CUT (DECIMAL INCH): 0.3750 ; LENGTH OF ...
    £36.34 Price with VAT: £43.61 Buy Surplus As Low As £22.25 Price with VAT: £26.70
    £22.25 Price with VAT: £26.70
    HELICAL SOLUTIONS 05132

    HELICAL SOLUTIONS

    05132

    SQUARE END MILL: 1/4" DIA, 1/2" LOC, 5 FLUTES, SOLID CARBIDE
    £37.08 Price with VAT: £44.50 Buy Surplus As Low As £22.25 Price with VAT: £26.70
    £22.25 Price with VAT: £26.70
    HELICAL SOLUTIONS 05157

    HELICAL SOLUTIONS

    05157

    SQUARE END MILLS; MILL DIAMETER (DECIMAL INCH): 0.2500 ; MILL DIAMETER (INCH): 1/4 ; NUMBER OF FLUTES: 5 ; END MILL MATERIAL: SOLID CARBIDE ; LENGTH OF CUT (DECIMAL INCH): 1.0000 ; LENGTH OF ...
    £48.94 Price with VAT: £58.73 Buy Surplus As Low As £29.66 Price with VAT: £35.60
    £29.66 Price with VAT: £35.60
    HELICAL SOLUTIONS 05472

    HELICAL SOLUTIONS

    05472

    SQUARE END MILL: 0.5000" DIA, 1" LOC, 0.5" SHANK DIA, 3" OAL, 5 FLUTES, SOLID CARBIDE
    £77.12 Price with VAT: £92.55 Buy Surplus As Low As £46.72 Price with VAT: £56.06
    £46.72 Price with VAT: £56.06
    HELICAL SOLUTIONS 06015

    HELICAL SOLUTIONS

    06015

    CHAMFER MILL: 1/8" DIA, 2 FLUTES, SOLID CARBIDE
    £23.73 Price with VAT: £28.48 Buy Surplus As Low As £14.83 Price with VAT: £17.80
    £14.83 Price with VAT: £17.80
    HELICAL SOLUTIONS 06045

    HELICAL SOLUTIONS

    06045

    CHAMFER MILL: 1/4" DIA, 2 FLUTES, SOLID CARBIDE
    £29.66 Price with VAT: £35.60 Buy Surplus As Low As £17.80 Price with VAT: £21.36
    £17.80 Price with VAT: £21.36
    HELICAL SOLUTIONS 06060

    HELICAL SOLUTIONS

    06060

    CHAMFER MILL: 3/8" DIA, 2 FLUTES, SOLID CARBIDE
    £37.08 Price with VAT: £44.50 Buy Surplus As Low As £22.25 Price with VAT: £26.70
    £22.25 Price with VAT: £26.70
    HELICAL SOLUTIONS 06063

    HELICAL SOLUTIONS

    06063

    CHAMFER MILLS; CUTTER HEAD DIAMETER (DECIMAL INCH): 0.3750; NUMBER OF FLUTES: 2; END TYPE: SINGLE; INCLUDED CENTERLINE ANGLE: 45; INCLUDED SIDE ANGLE: 45; LENGTH OF CUT (INCH): 3/16; SHANK D ...
    £49.69 Price with VAT: £59.62 Buy Surplus As Low As £30.40 Price with VAT: £36.49
    £30.40 Price with VAT: £36.49
    HELICAL SOLUTIONS 06075

    HELICAL SOLUTIONS

    06075

    CHAMFER MILLS; CUTTER HEAD DIAMETER (DECIMAL INCH): 0.5000; NUMBER OF FLUTES: 2; END TYPE: SINGLE; INCLUDED CENTERLINE ANGLE: 45; INCLUDED SIDE ANGLE: 45; LENGTH OF CUT (INCH): 1/4; SHANK DI ...
    £66.00 Price with VAT: £79.20 Buy Surplus As Low As £40.05 Price with VAT: £48.05
    £40.05 Price with VAT: £48.05
    HELICAL SOLUTIONS 06078

    HELICAL SOLUTIONS

    06078

    CHAMFER MILLS; CUTTER HEAD DIAMETER (DECIMAL INCH): 0.5000; NUMBER OF FLUTES: 2; END TYPE: SINGLE; INCLUDED CENTERLINE ANGLE: 45; INCLUDED SIDE ANGLE: 45; LENGTH OF CUT (INCH): 1/4; SHANK DI ...
    £80.83 Price with VAT: £97.00 Buy Surplus As Low As £48.94 Price with VAT: £58.73
    £48.94 Price with VAT: £58.73
    HELICAL SOLUTIONS 06120

    HELICAL SOLUTIONS

    06120

    CHAMFER MILLS; CUTTER HEAD DIAMETER (DECIMAL INCH): 0.1875; NUMBER OF FLUTES: 4; END TYPE: SINGLE; INCLUDED CENTERLINE ANGLE: 45; INCLUDED SIDE ANGLE: 45; LENGTH OF CUT (INCH): 3/32; SHANK D ...
    £25.96 Price with VAT: £31.15 Buy Surplus As Low As £15.57 Price with VAT: £18.69
    £15.57 Price with VAT: £18.69
    HELICAL SOLUTIONS 06123

    HELICAL SOLUTIONS

    06123

    CHAMFER MILLS; INCLUDED ANGLE: 90.00 ; CHAMFER MILL MATERIAL: SOLID CARBIDE ; COATING/FINISH: APLUS ; CUTTER HEAD DIAMETER (DECIMAL INCH): 0.1875 ; NUMBER OF FLUTES: 4 ; END TYPE: SINGLE
    £31.89 Price with VAT: £38.27 Buy Surplus As Low As £19.28 Price with VAT: £23.14
    £19.28 Price with VAT: £23.14
    HELICAL SOLUTIONS 06138

    HELICAL SOLUTIONS

    06138

    CHAMFER MILL: 1/4" DIA, 4 FLUTES, SOLID CARBIDE
    £36.34 Price with VAT: £43.61 Buy Surplus As Low As £22.25 Price with VAT: £26.70
    £22.25 Price with VAT: £26.70
    HELICAL SOLUTIONS 06165

    HELICAL SOLUTIONS

    06165

    CHAMFER MILLS; CUTTER HEAD DIAMETER (DECIMAL INCH): 0.5000; NUMBER OF FLUTES: 4; END TYPE: SINGLE; INCLUDED CENTERLINE ANGLE: 45; INCLUDED SIDE ANGLE: 45; LENGTH OF CUT (INCH): 1/4; SHANK DI ...
    £66.00 Price with VAT: £79.20 Buy Surplus As Low As £40.05 Price with VAT: £48.05
    £40.05 Price with VAT: £48.05
    HELICAL SOLUTIONS 06360

    HELICAL SOLUTIONS

    06360

    CHAMFER MILLS; CUTTER HEAD DIAMETER (DECIMAL INCH): 0.3750 ; END TYPE: SINGLE ; SHANK DIAMETER (DECIMAL INCH): 0.3750 ; SHANK DIAMETER (INCH): 3/8 ; OVERALL LENGTH (INCH): 2-1/2 ; NUMBER OF ...
    £31.15 Price with VAT: £37.38 Buy Surplus As Low As £19.28 Price with VAT: £23.14
    £19.28 Price with VAT: £23.14
    HELICAL SOLUTIONS 07001

    HELICAL SOLUTIONS

    07001

    CHAMFER MILLS; CUTTER HEAD DIAMETER (DECIMAL INCH): 0.2500; NUMBER OF FLUTES: 3; END TYPE: SINGLE; INCLUDED CENTERLINE ANGLE: 30; INCLUDED SIDE ANGLE: 60; SHANK DIAMETER (DECIMAL INCH): 0.25 ...
    £38.56 Price with VAT: £46.27 Buy Surplus As Low As £23.73 Price with VAT: £28.48
    £23.73 Price with VAT: £28.48
    HELICAL SOLUTIONS 07009

    HELICAL SOLUTIONS

    07009

    CHAMFER MILLS; CUTTER HEAD DIAMETER (DECIMAL INCH): 0.3750; NUMBER OF FLUTES: 3; END TYPE: SINGLE; INCLUDED CENTERLINE ANGLE: 45; INCLUDED SIDE ANGLE: 45; SHANK DIAMETER (DECIMAL INCH): 0.37 ...
    £52.65 Price with VAT: £63.18 Buy Surplus As Low As £31.89 Price with VAT: £38.27
    £31.89 Price with VAT: £38.27
    HELICAL SOLUTIONS 07011

    HELICAL SOLUTIONS

    07011

    CHAMFER MILL: 5/8" DIA, 3 FLUTES, SOLID CARBIDE
    £179.46 Price with VAT: £215.36 Buy Surplus As Low As £108.27 Price with VAT: £129.93
    £108.27 Price with VAT: £129.93
    HELICAL SOLUTIONS 07023

    HELICAL SOLUTIONS

    07023

    CHAMFER MILL: 1/2" DIA, 5 FLUTES, SOLID CARBIDE
    £88.99 Price with VAT: £106.79 Buy Surplus As Low As £53.39 Price with VAT: £64.07
    £53.39 Price with VAT: £64.07
    HELICAL SOLUTIONS 07031

    HELICAL SOLUTIONS

    07031

    CHAMFER MILL: 3/4" DIA, 5 FLUTES, SOLID CARBIDE
    £202.45 Price with VAT: £242.94 Buy Surplus As Low As £121.62 Price with VAT: £145.94
    £121.62 Price with VAT: £145.94
    HELICAL SOLUTIONS 07034

    HELICAL SOLUTIONS

    07034

    CHAMFER MILLS; INCLUDED ANGLE: 120.00 ; CHAMFER MILL MATERIAL: SOLID CARBIDE ; COATING/FINISH: APLUS ; CUTTER HEAD DIAMETER (DECIMAL INCH): 0.3750 ; NUMBER OF FLUTES: 5 ; END TYPE: SINGLE
    £53.39 Price with VAT: £64.07 Buy Surplus As Low As £32.63 Price with VAT: £39.16
    £32.63 Price with VAT: £39.16
    HELICAL SOLUTIONS 12122

    HELICAL SOLUTIONS

    12122

    BALL END MILL: 1/4" DIA, 3/4" LOC, 3 FLUTE, SOLID CARBIDE 2-1/2" OAL, 1/4" SHANK DIA, APLUS COATED, SINGLE END, SERIES 3 FLUTE, BALL (APLUS), END MILLS FOR STEELS, TOOL STEELS, & CAST IRON ( ...
    £39.30 Price with VAT: £47.16 Buy Surplus As Low As £23.73 Price with VAT: £28.48
    £23.73 Price with VAT: £28.48
    HELICAL SOLUTIONS 13167

    HELICAL SOLUTIONS

    13167

    BALL END MILL: 5/16" DIA, 7/16" LOC, 3 FLUTE, SOLID CARBIDE
    £88.25 Price with VAT: £105.90 Buy Surplus As Low As £53.39 Price with VAT: £64.07
    £53.39 Price with VAT: £64.07
    HELICAL SOLUTIONS 17105

    HELICAL SOLUTIONS

    17105

    BALL END MILL: 3/16" DIA, 9/16" LOC, 2 FLUTE, SOLID CARBIDE
    £31.15 Price with VAT: £37.38 Buy Surplus As Low As £19.28 Price with VAT: £23.14
    £19.28 Price with VAT: £23.14
    HELICAL SOLUTIONS 18165

    HELICAL SOLUTIONS

    18165

    BALL END MILL: 5/16" DIA, 7/16" LOC, 2 FLUTE, SOLID CARBIDE
    £45.24 Price with VAT: £54.28 Buy Surplus As Low As £27.44 Price with VAT: £32.93
    £27.44 Price with VAT: £32.93
    HELICAL SOLUTIONS 19075

    HELICAL SOLUTIONS

    19075

    SQUARE END MILL: 3/16" DIA, 7/32" LOC, 3 FLUTES, SOLID CARBIDE
    £44.50 Price with VAT: £53.39 Buy Surplus As Low As £26.70 Price with VAT: £32.04
    £26.70 Price with VAT: £32.04
    HELICAL SOLUTIONS 19120

    HELICAL SOLUTIONS

    19120

    SQUARE END MILL: 1/4" DIA, 3/8" LOC, 3 FLUTES, SOLID CARBIDE
    £36.34 Price with VAT: £43.61 Buy Surplus As Low As £22.25 Price with VAT: £26.70
    £22.25 Price with VAT: £26.70
    HELICAL SOLUTIONS 19122

    HELICAL SOLUTIONS

    19122

    SQUARE END MILL: 1/4" DIA, 3/8" LOC, 3 FLUTES, SOLID CARBIDE
    £45.98 Price with VAT: £55.17 Buy Surplus As Low As £28.18 Price with VAT: £33.82
    £28.18 Price with VAT: £33.82
    HELICAL SOLUTIONS 19210

    HELICAL SOLUTIONS

    19210

    SQUARE END MILL: 3/8" DIA, 1/2" LOC, 3 FLUTES, SOLID CARBIDE
    £48.20 Price with VAT: £57.84 Buy Surplus As Low As £28.92 Price with VAT: £34.71
    £28.92 Price with VAT: £34.71
    HELICAL SOLUTIONS 19237

    HELICAL SOLUTIONS

    19237

    SQUARE END MILLS; MILL DIAMETER (DECIMAL INCH): 0.3750 ; MILL DIAMETER (INCH): 3/8 ; NUMBER OF FLUTES: 3 ; END MILL MATERIAL: SOLID CARBIDE ; LENGTH OF CUT (DECIMAL INCH): 0.5000 ; LENGTH OF ...
    £120.88 Price with VAT: £145.05 Buy Surplus As Low As £72.68 Price with VAT: £87.21
    £72.68 Price with VAT: £87.21
    HELICAL SOLUTIONS 23070

    HELICAL SOLUTIONS

    23070

    SQUARE END MILLS; MILL DIAMETER (DECIMAL INCH): 0.2500 ; MILL DIAMETER (INCH): 1/4 ; NUMBER OF FLUTES: 3 ; END MILL MATERIAL: SOLID CARBIDE ; LENGTH OF CUT (DECIMAL INCH): 0.375 ; LENGTH OF ...
    £25.96 Price with VAT: £31.15 Buy Surplus As Low As £15.57 Price with VAT: £18.69
    £15.57 Price with VAT: £18.69
    HELICAL SOLUTIONS 23152

    HELICAL SOLUTIONS

    23152

    CORNER RADIUS END MILL: 3/8" DIA, 1/2" LOC, 0.50 MM RADIUS, 3 FLUTE, SOLID CARBIDE
    £55.62 Price with VAT: £66.74 Buy Surplus As Low As £33.37 Price with VAT: £40.05
    £33.37 Price with VAT: £40.05
    HELICAL SOLUTIONS 23200

    HELICAL SOLUTIONS

    23200

    SQUARE END MILL: 1/2" DIA, 1" LOC, 3 FLUTES, SOLID CARBIDE 3" OAL, 1/2" SHANK DIA, HELIX, SINGLE END, APLUS COATED, SERIES END MILLS FOR STEELS - 3 FLUTE - SQUARE - VARIABLE PITCH (MOQ=1, PK ...
    £70.45 Price with VAT: £84.54 Buy Surplus As Low As £42.27 Price with VAT: £50.72
    £42.27 Price with VAT: £50.72
    HELICAL SOLUTIONS 24167

    HELICAL SOLUTIONS

    24167

    SQUARE END MILL: 3/8" DIA, 1/2" LOC, 7 FLUTES, SOLID CARBIDE
    £53.39 Price with VAT: £64.07 Buy Surplus As Low As £32.63 Price with VAT: £39.16
    £32.63 Price with VAT: £39.16
    HELICAL SOLUTIONS 24182

    HELICAL SOLUTIONS

    24182

    SQUARE END MILL: 3/8" DIA, 7/8" LOC, 7 FLUTES, SOLID CARBIDE 2-1/2" OAL, 3/8" SHANK DIA, HELIX, SINGLE END, APLUS COATED, SERIES END MILLS FOR STEELS - 7 FLUTE - SQUARE - FINISHER (MOQ=1, PK ...
    £47.46 Price with VAT: £56.95 Buy Surplus As Low As £28.92 Price with VAT: £34.71
    £28.92 Price with VAT: £34.71
    HELICAL SOLUTIONS 24572

    HELICAL SOLUTIONS

    24572

    SQUARE END MILL: 1" DIA, 3-1/4" LOC, 7 FLUTE, SOLID CARBIDE 6" OAL, 1" SHANK DIA, APLUS COATED, SINGLE END, HELICAL SOLUTIONS END MILLS FOR STEELS - 7 FLUTE - SQUARE - FINISHER (MOQ=1, PKG Q ...
    £400.45 Price with VAT: £480.55 Buy Surplus As Low As £240.27 Price with VAT: £288.33
    £240.27 Price with VAT: £288.33
    HELICAL SOLUTIONS 26107

    HELICAL SOLUTIONS

    26107

    SQUARE END MILL: 1/4" DIA, 3/8" LOC, 7 FLUTE, SOLID CARBIDE
    £35.60 Price with VAT: £42.72 Buy Surplus As Low As £21.51 Price with VAT: £25.81
    £21.51 Price with VAT: £25.81
    HELICAL SOLUTIONS 26137

    HELICAL SOLUTIONS

    26137

    SQUARE END MILL: 1/4" DIA, 3/4" LOC, 7 FLUTE, SOLID CARBIDE
    £36.34 Price with VAT: £43.61 Buy Surplus As Low As £22.25 Price with VAT: £26.70
    £22.25 Price with VAT: £26.70
    HELICAL SOLUTIONS 26227

    HELICAL SOLUTIONS

    26227

    SQUARE END MILL: 3/8" DIA, 3/4" LOC, 7 FLUTE, SOLID CARBIDE
    £59.33 Price with VAT: £71.19 Buy Surplus As Low As £35.60 Price with VAT: £42.72
    £35.60 Price with VAT: £42.72
    HELICAL SOLUTIONS 27257

    HELICAL SOLUTIONS

    27257

    CORNER RADIUS END MILL: 1/2" DIA, 5/8" LOC, 0.0300" RADIUS, 7 FLUTE, SOLID CARBIDE
    £104.56 Price with VAT: £125.48 Buy Surplus As Low As £63.03 Price with VAT: £75.64
    £63.03 Price with VAT: £75.64
    Previous Next
    1 2 3 4 5 6 7 8 9 10